CHARGING THE BATTERY
Remove the handheld vacuum from the wand
by pressing the
Wand Release
button and pulling
up. Plug the charger into the charging port on the
handheld vacuum.
Plug the
Lithium Ion Power Pack Charger
into
a wall socket.
To put the vacuum in storage mode, press
the
Unlock
latch while folding the handheld
vacuum forward until the wand clicks and locks.
Plug the charger into the charging port on the
handheld vacuum.
To remove the battery, squeeze the
Battery
Release
Button
and slide backwards. Plug the
charger into the charging port on the battery.
IN HANDHELD VACUUM
LITHIUM ION POWER PACK CHARGER
FLEXOLOGY® STORAGE MODE
OUT OF THE VACUUM
POWER SETTINGS
Slide switch to the top to turn off power.
To begin vacuuming, slide switch to the
desired setting.
Hard Floor/Small Area Rugs
Use this setting to clean floors and small area rugs.
Carpet
Use this setting to pick up debris below the surface
of your carpets.
For an added boost in power, pull the
Trigger
on the handheld vacuum. Release it to return
to standard power.
OFF
HARD FLOOR SETTING
CARPET SETTING
BOOST MODE
ENGLISH
44
45
0800 862 0453
sharkclean .eu