11
sharkclean .co.uk
10
sharkclean .co.uk
Select surface setting:
O Power Off
I Hard Floor
For hard floors, small area rugs or
delicate carpets - the brush-roll will spin
but at a slower speed�
II
Carpet
For carpets�
NOTE:
All accessories are compatible with both the wand and the handle� Included accessories
will vary by model�
NOTE:
Brush-roll will continue to spin in all modes
CLEANING MODES
To engage
brush-roll
, step on floor nozzle
and tilt handle back firmly�
Step on the pedal on the floor nozzle to lift
off the pod�
WHAT DOES THE BRUSH-ROLL INDICATOR LIGHT MEAN?
Solid Green:
The brush-roll is spinning and working as intended�
Solid Red:
There is a jam in the brush-roll area� Turn off and unplug the vacuum and remove
any blockages in the nozzle�
Flashing Red:
The motorised floor nozzle is overheating� Turn the vacuum off and wait a
minimum of 60 minutes for the unit to cool down�
Press the
Wand Release
button and pull up on
the wand to detach it from the pod�
Press the
Handle Release
button and pull up on
the handle to detach it from the wand�
Attach an optional cleaning accessory to
handle or wand�
UPRIGHT MODE
LIFT AWAY MODE
POWER/SURFACE SWITCH
INDICATOR LIGHT
ABOVE-FLOOR—WAND
ACCESSORIES—WAND
ABOVE-FLOOR—HANDLE
ACCESSORIES—HANDLE
Wand
Release
SETTINGS
BRUSH-ROLL INDICATOR LIGHT
The
Suction Control Slider
located on the
handle allows you to adjust the suction
depending on the floor type�
MIN:
to reduce suction and increase
manoeuvrability on carpets�
MAX:
to increase suction on hard floors�
SUCTION CONTROL
