ShareTech LB-1105, Руководство пользователя

Страница: 6 / 40

LB-1105 User Manual
6
Minimum Requirements
•
One PC equipped with:
o
TCP/IP Protocol
o
A web browser
o
An Ethernet adapter with a UTP CAT 5 network cable OR A
wireless Ethernet adapter supporting 802.11n.
•
Internet access via cable modem or DSL modem with an Ethernet
connection.
Hardware
The Wireless Guard has 6 LEDs on the front panel, 4 of which are network
connection LEDs which correspond to network connections made by connecting
cables to the LAN interfaces (Green) of the device. They are paired to show
connectivity and whether the link is a 10 megabit or 100 megabit connection. One
LED corresponds to the connection to the WAN interface (Green), and whether
its link is 10 megabit or 100 megabit respectively. One LED for power (Blue).
Installation
Installation of the Wireless Guard is simple:
1. Plug in the network cable from the WAN interface of the Wireless Guard to
your DSL modem or cable modem.
2. Plug in a network cable from your computer to one of the four LAN interfaces
on the Wireless Guard OR configure your computer’s wireless interface to
use the Wireless Guard which has a default SSID of “AP001”. You do not
need to change your computer’s TCP/IP settings in either case.
3. Plug in the power to your Wireless Guard.
4. The Wireless Guard comes with default DHCP server enabled for range
(192.168.1.2- 192.168.1.254), Set the networking TCP/IP properties of the
system connected to Wireless Guard to get IP automatically from the DHCP
server. The Wireless Guard will assign a IP address to the connected PC.
5. Open a web browser. Change the URL shown at the top to use port 9953 by
typing http://192.168.1.1:9953
6. Once you have hit enter, the Wireless Guard will prompt you to enter a
username and password. The default username and password to log into the
administrative user interface is
admin and admin.