ShareTech LB-1105, Руководство пользователя

Страница: 26 / 40

LB-1105 User Manual
VPN
The Wireless Guard features a built-in PPTP VPN server, allowing clients in
both the LAN and WAN to build PPTP tunnels to the Wireless Guard.
Users
This page allows the administrator to add or remove PPTP/L2TP VPN users.
To add a new user, just enter the username, password and verify it, then
select the connection type and the click “Update” to add the user to the
“Users List” at the bottom. To delete a user from the list, check the
corresponding “Delete” box of the user on the “Users List” and then click
“Update” again to delete it.
PPTP Client
PPTP client supports LAN to LAN data transfer. That is, when connected with
a PPTP server, the pc under PPTP client’s LAN could access the machines
under the PPTP server’s LAN over a PPTP tunnel. To configure this function,
please follow these steps:
Step1. Please go to the VPN -> PPTP Client page. Under this page, you could
configure a PPTP tunnel.
Status decides whether or not the system will automatically attempt to
establish this PPTP tunnel. Save and Connect means that automatic attempt
at the end of the configuration while Save and Connect Later means the
opposite. Using the picture below as an example you would see that the
Status is Save and Connect.