LB-1105 User Manual
17
Channel:
Select the appropriate channel from the list provided to correspond
with your network settings. You shall assign a different channel for each
AP to avoid signal interference. If “Auto” is selected, it will auto scan all
channel and auto select one to use.
Channel Width:
This field only available when 802.11n mode is selected. When
in 802.11n mode. You can select channel width 20MHz, 20/40MHz, or
40MHz.
Extension Channel Offset:
This field only available when 802.11n mode is
selected and channel width is 40MHz only. You can select channel offset
to PLUS or MINUS.
Preamble Type:
The default value is “Short”. It defines the length of the CRC
(Cyclic Redundancy Check) block for communication between the Access
Point and roaming wireless adapters.
Beacon Interval:
The default value is “100”. It used to synchronize a wireless
network from Access Point.
Fragmentation Threshold:
The default value is “2346”.It used to divide 802.11
frames into smaller pieces.
RTS Threshold:
The default value is “2347”. It used to minimize collisions
among wireless stations.
DTIM Interval:
The default value is “3”. DTIM(Delivery Traffic Indication Message)
is a countdown informing clients of next messages.
Client Isolation:
This field allows you to prevent wireless client from
communicating with each other.
Protection Mode:
.This function used to improve the 802.11g performance in
802.11 mixed environments.
Frame Burst:
This setting can speed up data transmissions if you have a small
network and all of your clients support Frame Burst.
WMM:
.This field WMM(Wi-Fi Multimedia) is used to support higher audio/video
priority for media streaming.
WMM No-Acknowledgement:
No-Acknowledgement refers to the acknowledge
policy used at the MAC level. Enabling no-acknowledgement can result in
more efficient throughput but higher error rates in a noisy Radio
Frequency (RF) environment.
Содержание LB-1105
Страница 1: ...LB 1105 User Manual...
Страница 36: ...LB 1105 User Manual 36...
