User’s Guide
HRP/S
-
27
-
HS
Maintenance
The machine requires very little maintenance. Occasionally
remove loose dirt from the machine and brush it clean.
10.1
SAFETY MEASURES
1.
Switch off the main switch
2.
Clear the working surface
3.
Switch off the control units (switch
H
)
4.
Check that the heating elements and pressure bars in the
top frame are firmly attached
5.
Disengage the air connection
6.
Remove the plug from the socket.
10.2
LUBRICATION POINTS
The following points should be lubricated with a drop of oil or
grease once a year:
10.2.1
Cylinder bearing: bottom.
To reach the lubrication point remove a frame plate on the rear
or side of the machine.
10.2.2
Cylinder bearing: top.
To reach the lubrication point remove the control units next to
the central support.
(See Section
12
.)
10
Bearing
Bearing
