User’s Guide
HRP/S
-
22
-
HS
Alterations
9
3.
Fully loosen the socket head screw in the centre of the
heating element.
(Use socket screw key
no. 3
).
4.
Lift the heating element out of the machine.
5.
Remove the supporting prongs on the left and right by
undoing the socket head screws.
(Use socket screw key
no. 5
).
9.2.2 Installation/replacement
When replacing a heating element with a different type,
first
change the supporting prongs.
1.
Place the two supporting prongs on the outermost
aluminium
X
-profiles and screw them into the notched
nuts using socket head screws (M6x12 cylinder head). (Use
socket screw key
no. 5
). Do not tighten them fully yet. Line
them up with each other.
3
5
Supporting prong
Supporting prong
1
