User’s guide
HRK 65-125
-
7
-
HS
Safety
To ensure safety when using the machine you should read this
User's Guide carefully and follow the safety instructions closely
Attention!
The machine contains a section where there is a risk of
trapping.
Attention!
The machine contains parts, which are hot. Touching them will
cause burns.
Allow hot parts to cool sufficiently (at least 10 minutes) before
touching them.
Never touch the filaments or the reflectors when the machine
is in operation.
Always wear close-fitting clothing.
Be particularly careful of sleeves and always tie back long hair.
Never leave objects on the working surface.
The machine may only be used for heating narrow zones in flat
plastic sheet.
Any other use could lead to very hazardous situations or cause
damage to the machine!
The plastic sheets that have to be bent may never be thicker
than 6 mm.
Before commissioning and servicing always check the
connection cable and plug for defects.
3
