Shakmat Aeolus Seeds, Руководство по эксплуатации

Страница: 7 / 28

www.shakmat.com
•
06/26
4. PCB stacking
4.1 Headers bottom PCB P1
Headers are used to stack the two PCBs together,
There are three pairs of 8 pin male & female headers and two 4 pin pairs. First
assemble all the headers with their mate and place them on the bottom PCB,
female side down. Then assemble the two boards toghether and solder one
pin, on each side, for each header. Once the PCBs are held together and
correctly aligned, you can solder all the remaining points. If the PCB are not
aligned re-heat the leg of the faulty header and correct alignment.
2x 3x