Shakmat Aeolus Seeds, Руководство по эксплуатации

Страница: 8 / 28

www.shakmat.com
•
07/26
4.2 Headers Tactical Plan P1
Now, we are going to stack the Tactical Plan with
the previous step PCB pair. For this we use two 20 pin pairs of male & female
headers. First assemble the headers, then place them on the Tactical Plan,
male side down. Then assemble the two boards toghether and solder one pin,
on each side, for each header. Once the PCBs are held together and correctly
aligned, you can solder all the remaining points.
Be very careful with the soldering of the female part of the headers. Once the
all the components will be in place, those solder points will be very hard to
reach. When everything is well soldered, disconnect the two boards and
proceed to the next step with the top PCB.
2x