2
I M P O R T A N T :
Please read this entire manual before installing or operating your Orion umbrella.
O R I O N W I N D R E S I S T A N C E G U I D E L I N E S :
Moderate to Moderately Strong Winds (when mounted)
When installed properly, the Orion is engineered to handle moderate to moderately
strong wind conditions in the open canopy position. Please adhere to these wind
guidelines:
1. As winds get stronger, or in anticipation of uncertain/severe weather conditions, the
canopy should be lowered to the folded and strapped position.
2. The Orion should always be left in the folded and strapped position when
unattended or not in use.
3. In anticipation of, and during extremely severe weather conditions, it is advisable to
remove and store the Orion to protect it from storm-related debris.
9
Weight: Approximately 78-103 lbs.
Mast Shape & Diameter: 2.75” x 4.375” Oval
Mast Thickness: 0.125”
Arm Thickness: 0.051”
0.051”
0.125”
4.375”
2.75”
Arm
Mast
To Close Canopy
1. Turn crank handle counter-clockwise and continue winding until
canopy is lowered, strap canopy.
To Rotate 360°
1. There are (8) 45° locking rotating positions. Raise the
turning handle above 90° and rotate mast to one of the
8 preset positions.
2. Lower handle to lock into place.
L I G H T A D A P T E R
To open light adapter:
Loosen light adapter built into the umbrella runner by turning
counter-clockwise. After loosening, pull down light adapter
post and attach umbrella light (sold separately).
To close light adapter:
Gently push up the light adapter post back into umbrella
runner and tighten turning clockwise
NOTE:
It is not
necessary to remove light to close umbrella.
B
C
D
A
Item No.
A
Canopy to
Mast Width
B
Total Height
C
Height to Arm
D
Canopy Clearance
Closed
OR-27S
9’6”
9’3”
6’9”
2’4”
OR-27S
10’6”
9’7”
6’11”
1’9”
OR-27S
9’4”
8’11”
7’
3’6”
OR-27S
11’4”
9’4”
7’4”
2’9”
OR-27S
12’3”
9’10”
7’4”
2’6”
S P E C I F I C A T I O N S
To Properly Remove Canopy Structure
1. Lower the canopy to the closed position.
2. Disconnect sister clips on canopy structure from the clip on stainless wire.
3. Turn canopy structure 90° and slide out of head fitting.
4. Store away canopy structure.
5. Secure loose end of sister clip to sister clip safety stud.
Sister Clip on Safety Stud
Содержание Orion OR-27S
Страница 1: ......
