ShadeLab SVET, Инструкция по сборке

Страница: 15 / 24

| ASSEMBLY |
15
Fit the terminal bar connecting kit (see ref. 14
fig. 12) onto the end of the arm (see ref. 15
fig. 12), (box spanner 13).
ATTENTION
Ensure that the two kits are correctly fixed to
the ends of the arms.
fig.12
Assemble the arms (see ref. 16 fig. 13) on the
respective levers.
Fit the plate with pin (see ref. 17 fig. 14) on
the roller support which goes on the side op-
posite the control (Allen wrench 5, combina-
tion spanner 10).
MANUAL AWNING:
Assemble the crank (see ref. 18 fig. 15),
choosing the position of the screws to suit its
inclination (Allen wrench 5).
MOTOR-OPERATED AWNING:
Assemble the motor plate (see ref. 19 fig. 16).
fig.16
fig.14
fig.15
fig.13
14
15
16
17
18
19