ShadeLab SVET, Инструкция по сборке

Страница: 14 / 24

14
| | ASSEMBLY
MOTOR-OPERATED AWNING:
Insert the motor (see ref. 7 fig. 8) in the roller
tube (see ref. 8 fig. 8).
ATTENTION
These instructions are of a general nature, so
you must follow the ones given in the motor
manual.
Insert the square bar (see ref. 9 fig. 9) in the
two brackets positioned previously (see ref.
10 fig. 9) and block it.
Fit the arm supports (see ref. 11 fig. 10) onto
the square bar in the correct positions (see
tab. par. 3.4), (box spanner 13).
Preassemble the plate (see ref. 12 fig. 11) in
the terminal bar connecting kit (see ref. 13
fig. 11), (Allen wrench 5). The screws must
not be fully tightened.
ATTENTION
The arm is provided with a safety band that
blocks the tightening mechanism. Do not
remove this band until the awning has been
completely assembled. Failure to respect the
correct assembly procedure may cause seri-
ous harm to persons, animals and things in
the vicinity.
ATTENTION
NEVER reuse the arm lock after removing it.
fig.11
fig.9
fig.10
fig.8
8
7
10
9
11
12
13