SGS SPG2200, Руководство пользователя, Страница: 8 / 16

PAGE 15 PAGE 14
STARTING THE GENERATOR - ELECTRIC START
7. Turn the engine start key
to ‘start’ position untill
generator engine starts.
8. Once generator engine
starts, move choke lever
over to the right
.
1. Start the engine and allow to run for a few minutes in order
for it to warm up.
NEVER have any appliances/tools etc plugged in
when starting the generator engine.
2. After engine has warmed up, you can then plug in appli-
ances/tools into the generator outlets. As a general rule,
switch on appliances/tools etc that you think will take the most
power demand first.
3. ALWAYS ENSURE the correct voltage is selected, using the
voltage selector.
If the appliance/tool has a standard 3 pin plug it
must be used in conjunction with a flylead and
plugged into the blue socket.
If the appliance / tool has a blue socket attached then it is 230
V, and must be plugged into the BLUE outlet on the genera-
tor.
If the appliance / tool has a yellow socket attached then it is
115 V, and must be plugged into the YELLOW outlet on the
generator.
OPERATING THE GENERATOR
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE:
01332 576 850