
PAGE 21
PAGE 20
MAINTENANCE SCHEDULE
Tip: Parts replacements are only to be carried out
by competent persons. If in any doubt, please
contact SGS Engineering for help.
Spark plug maintenance.
• Remove the spark plug cap from the
spark plug.
• Use a spark plug spanner (supplied) to
remove the spark plug.
• Check for discoloration and use a wire
brush to remove any carbon build up.
• Check the spark plug gap with a feeler
gauge, it should be between 0.6 and
0.7 mm. Adjust if necessary.
• Check the overall condition of the spark
plug and replace if damaged.
• Reinstall the spark plug and replace the
spark plug cap.
• CAUTION: ALLOW THE ENGINE
TO COOL BEFORE REMOVING THE
SPARK PLUG.
Air filter maintenance.
• Remove the air filter element.
• Wash it in a solution of warm water and
mild detergent.
• Rinse thoroughly and leave it to dry.
Once it is completely dry immerse the
filter in clean engine oil and squeeze
the filter to remove excess oil.
• Replace the filter into its original posi-
tion and replace and secure the cover.
MAINTENANCE INSTRUCTIONS
ITEMS
REMARKS
PRE-OP-
ERATION
CHECK
(DAILY)
INITIAL 1
MONTH or
10HR
EVERY 3
MONTHS
or 50HR
EVERY 6
MONTHS
or 100HR
EVERY 12
MONTHS or
300HR
Spark plug
Check condition, adjust
gap and clean. Repeat if
necessary.
X
Engine oil
Check oil level.
X
X
Replace.
X
Air filter
Clean. Replace if
necessary.
X
Fuel filter
Clean fuel drain filter.
Replace if necessary.
X
Valve
clearance
Check and adjust when
engine is cold.
X
Fuel line
Check fuel hose for
crack or damage.
Replace if necessary
X
Exhaust
system
Check for leakage.
Retighten or replace
gasket if necessary.
X
Check muffler screen.
Clean / replace if
necessary.
X
Caraburet-
tor
Check choke operation.
X
Starting
system
Check key start ignition.
X
Decarboni-
sation
More frequently if`
necessary
X
Fittings/
Fasteners
Check all fittings and
fasteners. Correct if
necessary.
X
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE:
01332 576 850
Содержание SPG2200
Страница 13: ...PAGE 25 PAGE 24 SPG2200 WIRING DIAGRAM WWW SGS ENGINEERING COM CALL FOR ASSISTANCE 01332 576 850...
Страница 14: ...PAGE 27 PAGE 26 SPG3000 WIRING DIAGRAM WWW SGS ENGINEERING COM CALL FOR ASSISTANCE 01332 576 850...
Страница 15: ...PAGE 29 PAGE 28 SPG6500 WIRING DIAGRAM WWW SGS ENGINEERING COM CALL FOR ASSISTANCE 01332 576 850...