SGS SPG2200 Скачать руководство пользователя страница 12

PAGE 23

PAGE 22

MAINTENANCE INSTRUCTIONS

 
 

Engine oil maintenance.

•  Warm up the engine on level ground.
•  Turn the engine off.
•  Remove the oil filler sump plug. Open 

the drain sump plug and let the oil drain 
completely into a pan placed under the 
engine.

•  Refit the drain sump plug and fill the en-

gine with clean FOUR STROKE oil only. 
Replace the filler cap.

Fuel filter maintenance.

•  Inside of the fuel tank, there is a fuel 

filter, this filter will need checking peri-
odically. 

•  Remove the fuel cap from the fuel tank. 
•  Lift out the fuel filter. 
•  Clean the filter with solvent. If the filter is 

damaged, contact SGS Engineering. 

•  Replace the filter and fuel cap. 

WARNING: DO NOT SMOKE AND/OR 
HAVE ANY NAKED FLAMES 
DURING THIS PROCESS

MAINTENANCE INSTRUCTIONS

Draining the fuel.

•  You should drain your generator of fuel 

before you put it into storage.

•  Fuel goes stagnant if you left to stand for 

too long; this may damage your genera-
tor and affect how it runs.

•  Pull the fuel hose from the casing while 

leaving it attached to the fuel tap.

•  Set to the tap to the ON position.
•  Place the fuel hoes into an appropriate 

container or bottle.

•  Tilt the generator towards the fuel hose 

and allow all the fiel to drain.

Draining the oil.

•  Place a tray underneith ther oil sump 

screw.

•  Remove the sump screw
•  Tilt the generator towards yourself and 

allow all the oil to drain.

See our help and advice section for videos and guides on 
setting up, starting and maintaining your generator.

http://www.sgs-engineering.com/help-advice

WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE: 

01332 576 850

Содержание SPG2200

















Отзывы: