SGS GPB260 Скачать руководство пользователя страница 2

PAGE 3

PAGE 2

SPECIFICATION

MODEL No

GPB260

ENGINE SIZE 

25.4 cc

POWER

0.75KW / 1HP

MAX AIR SPEED

225kph / 140mph

FUEAL TANK CAPACITY 

400cm

3

 

AIRFLOW VOLUME 

0.17m

3

/s

WEIGHT

4.7 kg

WARNING

Read and understand the instruction manual before
using the blower. Restrict unit to users who understand 
and will follow all warnings and safety rules in this
manual.

Approved protective goggles or visor, ear protection, 
gloves, and face mask in dusty environments must be 
worn.

WARNING: This blower can be dangerous! Careless
or improper use can cause serious or even fatal
injury.

GENERAL SAFETY PRECAUTIONS

WARNING: Be sure the bottom cover is secured or the 
vacuum tube is properly installed. Avoid the impeller
blade with your hand or any foreign object.

WARNING: The blower may throw objects at high  
velocity that can ricochet and hit the operator. 

WARNING: The muffler is very hot during and after use. 
Do not touch the muffler, muffler guard, or surrounding 
surfaces and do not allow combustible material such as 
dry grass or fuel to do so.

When using the vacuum attachment the unit is designed 
to pick up dry material such as leaves, grass, small twigs, 
and bits of paper. Do not vacuum stones, gravel, metal, 
broken glass, etc, to avoid severe damage to the   
impeller.

Keep children, bystanders, and animals away from work 
area at a minimum of 15 meters when starting or operat-
ing unit. Do not point blower nozzle in the direction of 
people or pets.

Only use unleaded petrol and two stroke oil.

WWW.SGS-ENGINEERING.COM

Содержание GPB260














Отзывы: