7
Unpacking
Unpack the device and inspect it to ensure that it has not been damaged during transport.
The P-1 is shipped with:
• One IP66 power input connector, 2 m (78 in)
• One Omega bracket with 1/4-turn fasteners
• Filters (optional)
• Ceiling / wall mount (optional)
• Barndoor (optional)
Location / application
The fixture is IP65-rated and designed for both indoor and outdoor events. This means that it is protected from:
•
Dust, to the degree that dust cannot enter the device in sufficient quantities as to interfere with its operation.
• Lower pressure jets of water from any direction.
When selecting a location for the device, ensure that:
• It is situated away from public thoroughfares and protected from contact with people.
• It is not immersed in water or exposed to high-pressure water jets.
• It has adequate ventilation.
Transportation
Always use the supplied packaging or suitable flight case for transportation and storage.
Never carry the fixture by connected cables or wires.
Preparing for installation
The P-1 may be installed in any orientation. Always use an omega bracket to rig the fixture and lock the bracket with the 1/4-turn
fasteners.
Please note:
The 1/4-turn fasteners are only locked when turned fully clockwise.
Installing / rigging the P-1
Figure 2: Dimensions for P-1 base locking points
24mm
0,946in
15mm 0,591in
106mm
4,173in
78mm 3,071in
210mm
8,268in
52mm
2,047in
39mm 1,535in
A
18mm
0,709in
14mm
0,551in
DETAIL A
SCALE 1 : 1
