15
Level 1
Level 2
Level 3
Level 4
Function
Info
Product type
-
-
Displays product type.
Firmware version -
-
Displays installed firmware version.
Serial number
-
-
Displays SGM serial#.
DRM ID
-
-
Displays RDM ID. (Unique RDM ID for identification).
DMX view
Up to 492 DMX addresses -
Displays received DMX levels.
Sensors
Mainboard
-
Displays fixture temperatures.
Led left
-
Led right
-
Humidity
-
Displays humidity percentage.
AC connected
-
Displays whether power is connected or not.
Battery PCT
-
Displays battery level.
Charging
-
Displays whether the battery is charging or not.
Battery VDC
-
Displays battery voltage.
Wireless signal
-
Displays wireless signal strength.
Wireless paired
-
Displays wireless connection status.
On time red 1
-
Display LED total power on time. (R, G, B, W).
On time green 1
-
On time blue 1
-
On time white 1
-
On time red 2
-
On time green 2
-
On time blue 2
-
On time white 2
-
Power on time
-
-
Displays fixture total power on time.
LED on time
-
-
Displays LED total power on time. (R, G, B, W).
Errors
-
-
Displays error codes.
Settings
Wireless DMX
Log off
-
Sends Log off command to the CRMX System.
Enable/disable
-
Enable/disable wireless DMX functionality.
Bridge
-
Display strength of the wireless connection.
Status
-
Displays wireless connection status.
Startup mode
Select startup mode
-
Default operating mode when fixture is powered on:
1. DMX (factory default)
2. Stand-alone
3. Quick Color
Startup program
Select startup
program
Stand-alone program 1, 2 or 3.
Only used if the startup mode is set to “stand-alone”.
Program 1 is default.
DMX loss
DMX hold
-
Select what happens if DMX signal is lost.
All on
-
Blackout
-
Quick color
-
AC power loss
function
Battery backup
-
Select what happens if AC power connection is lost.
Emergency light
-
Power off
-
Battery extension Set battery extension time
Off or 1-24h
Configures battery extension function.
LED frequency
Set LED frequency
-
Sets LED frequency.
Flip display
-
-
Flips control panel display.
Display off
-
-
Toggles automatic display sleep.
Factory default
-
-
Reset the fixture to factory default settings.
Service pin
-
-
-
Service menu
-
-
-
Test
Self test
Start/stop self test
-
Activates automated self test.
Display test
-
-
Test the fixture display.
Color test
Start/stop color test
-
Test the LED segments of the fixture.
Power off
-
-
-
Turns the fixture off.
