SGM G-PROFILE, Руководство пользователя

Страница: 17 / 72

17
Using stand-alone operation
Stand-alone operation is where the fixture is not connected to a control device, but is preprogrammed with a series of up to
24 scenes, that play continuously in a loop. This program can be set to run by default whenever the fixture is started.
Manual control / Internal sequence editor
The editor offers the ability to adjust all DMX parameters of the fixture. Each scene has its own DMX settings. Each scene
has a definable fade-in time, for the transition from the previous scene, and a wait (static) time, each with a fade time up to
4000 seconds and a wait time up to 4000 seconds.
The 24 scenes can be preset directly from the editor using the control panel.
The editor can also capture DMX values from a controller utilizing the ‘Control -
channel’ (See “DMX protocols” on page 38) or capture live DMX values directly
using the editor on the fixture.
To set a single static scene, set the fade time of scene 2 to 0.0 seconds, this
will keep the fixture running scene 1.
To set a sequence of less than 24 scenes, set the fade time of the scene after
the last scene to 0.0 seconds, this will keep the fixture looping scene 1 to the
scene before the scene with 0.0 seconds fade time.
The copy/paste function offers the ability to create replicas of a previous

created scene.
Locating the editor:

• Press OK to enter the menu.

• Navigate to “Manual” and press enter.
Manual_G_Profile_EN_170x113,3.book Page 17 Wednesday, December 9, 2015 10:17 AM