SGM G-PROFILE, Руководство пользователя

Страница: 13 / 72

13
Start the rigging process by blocking the work area below, and make sure the work is performed from a stable platform.
1 Check that the clamps are undamaged and can bear at least 10 times the weight of
the fixture. Check that the structure can bear at least 10 times the weight for all in-
stalled fixtures, clamps, cables etc.
2 Bolt each clamp securely to an Omega bracket with an M12 / ½” bolt (min. grade 8.8)
and lock nut.
3 Align an Omega bracket with two 1/4-turns in the base. Insert the fasteners into the
base and turn both levers a full 1/4-turn clockwise to lock. Install the second Omega
bracket.
4 Working from a stable platform, hang the fixture on a truss, or other structure. Note
the position of the base. The front of the base is to the right, when looking at the dis-
play panel, and when the fixture is sitting on the base. Tighten the clamps.
5 Install two safety wires that each can bear at least 10 times the weight of the unit.
The attachment points are designed to fit a carabiner.
6 Check that the pan/tilt locks are released (A and B). Verify that there are no

combustible materials or surfaces to be illuminated within 0.3 m (12 in.) of the fixture.
7 Check that there is no possibility of head or yoke colliding with other fixtures.
FRONT
Manual_G_Profile_EN_170x113,3.book Page 13 Wednesday, December 9, 2015 10:17 AM