14
Connecting AC power
The G-Profile can operate on any 200-240V, 50/60 Hz mains power supply.
Connect the fixture to power using a cable with a Neutrik powerCON TRUE1
connector (supplied with the fixture). Connect both DMX in and DMX out cables
in order to maintain the fixture IP65.
The fixture must be grounded/earthed and be able to be isolated from AC power.
The AC power supply must incorporate a fuse or circuit breaker for fault protec-
tion.
•
Connect the black wire to live
•
Connect the white wire to neutral
•
Connect the green wire to ground (earth)
After connecting the G-Profile to power, run the on-board test, using the
“Test
→
LED Test” menu, to ensure that the fixture is functioning correctly.
See “Control panel menus” on page 22.
Fuse Power
In
DMX
In
DMX
Out
Manual_G_Profile_EN_170x113,3.book Page 14 Wednesday, December 9, 2015 10:17 AM
Содержание G-PROFILE
Страница 1: ...G PROFILE MOVING HEAD Manual_G_Profile_EN_170x113 3 book Page 1 Wednesday December 9 2015 10 17 AM...
Страница 69: ...69 User s notes Manual_G_Profile_EN_170x113 3 book Page 69 Wednesday December 9 2015 10 17 AM...
Страница 70: ...70 Manual_G_Profile_EN_170x113 3 book Page 70 Wednesday December 9 2015 10 17 AM...
Страница 71: ...71 Manual_G_Profile_EN_170x113 3 book Page 71 Wednesday December 9 2015 10 17 AM...