SGB VL-H9, Руководство пользователя

Страница: 6 / 50

SAFETY INSTRUCTIONS
VACUUM LEAK DETECTOR VL – H9
09.11.04 Your Partner for Leak Detection Technology
Sicherungsgerätebau GmbH, Siegen
- P - 4 -
8. Section 8.6.3 “Operation” has been added to the documentation as follows:
After the test work is carried out, ensure again that the 3-way-cocks are in the shown position.
9. Section 9 “Removal” has been added to the documentation as follows:
For removal, the following points must be observed in particular:
•
Make sure the unit is free of gas before and during removal (see also section 4 above).
•
Seal any openings gas-tight through which the explosion atmosphere can carry over.
•
Avoid using spark-producing tools (saws, parting grinders, etc.) for removal whenever
possible. If this is unavoidable, be certain to observe EN 1127.
•
Avoid the buildup of electrostatic charges (e.g., through friction).
•
Properly dispose of contaminated components (possibly through outgassing).
6 von 50