RADIAL ROCKET 10cc
26
ELEVATOR PUSHROD
INSTALLATION.
1) Locate items necessary to install eleva-
tor pushrod.
Hex nut.
Fuel tubing.
M2 clevis.
Elevator pushrod.
2) Thread one clevis and M2 lock nut on
to each elevator control rod. Thread the
clevises on until they are flush with the
ends of the control rods.
3) Elevator pushrods assembly as pictures
below.
Epoxy.
Rudder fiberglass control horn.
2) Thread one clevis and M2 lock nut on
to each rudder pushrod. Thread the clev-
is on until they are flush with the ends of
the control rods.
Rudder pushrod.
RUDDER PUSHROD
INSTALLATION.
1) Locate items necessary to install rud-
der pushrod.
TAILWHEEL INSTALLATION.
1) Mount the tailwheel assembly in place
on the lower rear end of the fuselage, us-
ing two M2 x20mm screws.
Содержание Radial Rocket TD 10cc
Страница 30: ...RADIAL ROCKET 10cc 30...
