SG Models Radial Rocket TD 10cc, Инструкция по сборке

Страница: 20 / 31

RADIAL ROCKET 10cc
20
Needle valve.
3x10mm
3x10mm
2) Install the muffler onto the engine and
make the cutout in the cowl for muffler clear-
ance. Connect the fuel and pressure lines to
the carburetor, muffler and fuel filler valve.
Reinstall and secure the cowl to fuselage us-
ing the M3x10mm screws.
ELECTRIC POWER CONVERSION.
1) Locate the items neccessary to install
the electric power conversion included
with your model.
2) See below for the recommended elec-
tric motor setup.
- Motor: 35-50mm 650-850 rev per volt
- Propeller: 12x6 ~ 13x6
- ESC: 60-80A
- Lipo Batteries: 4-6 cell 4200-4500mAh
3) Attach the motor box to the firewall
using M4x20mm to secure. Using the
cross lines on the motor box as guides,
extend these lines with a straight edge
and a pencil.
M4x20mm