2
1.
Warning
When connecting or disconnecting the connector cable between the main body and
the power supply unit,
be sure to unplug the power cord
first.
If the cable is connected or disconnected while the power switch is on, the main body
will
break down
. In this case, repairs will incur charges, even during the
warranty period.
2.
Connection Instructions
1)
Connecting the DSP-030EX
①
First, check that the power cord for the DSP-030EX power supply unit is
unplugged. Also, check that the power switch on the power supply unit is off.
The power switch is located on the bottom of the power supply unit near the
center toward the front panel.
②
Connect the power supply unit to the DSP-030EX main body using the 2 cables.
After firmly inserting the cables all the way, use the ring-shaped screws to secure
them firmly. Match the screws with the grooves on the connector and turn the
screws while pressing straight down on them. If the connection is insufficient, it
may lead to malfunction or in the worst case, breakdown of the main body.
③
Connect the external clock unit to the DSP-030EX main body BNC terminal.
④
Connect power cable of the external clock unit to the DSP-030EX main body
clock power supply terminal.
⑤
Connect the preamp (pre-main amp) to the DSP-030EX. For this connection you
can use a balanced cable or an RCA cable. Although using both simultaneously
will not lead to a breakdown, it is not recommended from an audio quality
standpoint. For detailed connection instructions, refer to the amp manual.
⑥
Connect the LAN cable to the LAN port on the back of the DSP-030EX main
body and connect the DSP-030EX to your home LAN network. If you use DELA
or fidata for NAS, you can connect directly to the NAS. For details, refer to the
NAS manual.
⑦
Connect the power cord to the DSP-030EX power supply unit and plug it into a
socket.
⑧
When turning the power switch on, be very careful that the speaker is not
damaged by the DSP-030EX switch noise. Turn the amp power off or switch the
