Installer Setup -
Automated Demand Response
34
Cool Setpoint Offset
(setup step 57)
Heat Setpoint Offset
(setup step 58)
Specifies how much the current setpoints in effect prior to an event
will be altered during an event when the PRICE DEPENDENT ACTION
is set to OBSERVE SETPOINT OFFSETS. The heat setpoint can be
automatically lowered by 1 to 10 degrees while the cool setpoint can
be automatically raised by 1 to 10 degrees.
DISPLAY INDICATIONS WHEN AN ADR EVENT IS HAPPENING
After setting your desired values for use during an ADR event,
the scrolling display will give a little information when an event is
pending or active. For instance, when an ADR event has been sent
to your thermostat, you might see ADR STARTS at 4:15 to notify you
of a pending event. Once active, you might see ADR STOPS at 5:30.
If you have configured a threshold for cost of energy past which you
want to trigger an event, you will see PRICING EVENT on the display.
When an event is active, you can press any of COOLER, WARMER or
MODE buttons, followed by the WARMER to opt out of the event.
Содержание Premier Series SFTHRP742WFC
Страница 6: ...2 Get To Know Your Thermostat Setup Buttons...
Страница 47: ...88 1256 rev 1b 04 18 18 Patent Pending...