SF Premier Series SFTHRP742WFC, Руководство пользователя и инструкции по установке

Страница: 37 / 47

Installer Setup -
Automated Demand Response
33
ADR
(Setup step 51)
Controls whether you want the thermostat to possibly respond to
signals from the utility provider. Select ON to allow this and to
have steps 52-58 appear.
Price Dependent Action
(Setup step 52)
Allows the user to determine what action is taken when the price
rises above the set threshold. Note that the threshold price is only
adjustable via Skyport.
None – take no action when the set price threshold is exceeded
Observe Setpoint Offsets – will offset the heat and cool setpoints by
the amounts specified in setup steps 57 and 58
Observe Static Setpoints – will set the heat and cool setpoints to the
values specified in setup steps 55 and 56
Event Max Cool Setpoint
(Setup step 53)
Event Min Heat Setpoint
(Setup step 54)
Specifies the range of allowable setpoint adjustments to be
enforced when any ADR signal has been received from the utility.
Since you might be paying more for energy while an event is
active, you can impose tighter limits on setpoint ranges that are
only enforced during the event.
Static Cool Setpoint
(Setup step 55)
Static Heat Setpoint
(Setup step 56)
Specifies the setpoints that will come into use during an event
when the PRICE DEPENDENT ACTION is set to OBSERVE STATIC
SETPOINTS