24
25
The Sample of Self-test Printout
Upon initial installation or for troubleshooting, you can run the diagnostic test to
get information about:
Firmware version, emulation, codepage, sensor settings, interface settings, etc.
If no issues are found with diagnostic test, examine other devices and software.
The diagnostic test is working independent of devices and software.
●
Do Not Overheat the Motor
To prevent the motor from overheating, stop the printer for at least 30 seconds after
continuously printing 1.5 meters.
5. Peripherals Connection
NOTE
Please refer to the Configuration manual for detail.
This product can communicate with other devices via Bluetooth,
Wi-Fi or a communication cable.
5-2. Wi-Fi Connection
1. The Printer can be connected to devices equipped with Wi-Fi communication
capacity (PDAs, PCs, etc.)
2. Use the Wi-Fi connection function supported by the device to connect
to the printer.
1. Printer can be connected to a PDA or a PC using a wireless Bluetooth connection.
2. If your computer supports Bluetooth, you can pair the printer with the computer.
NOTE
Please refer to the Configuration manual for detail.
5-1. Bluetooth Connection
