sewerin Multitec 540, Руководство по эксплуатации

Страница: 17 / 64

10 │ 3 Operation
3.1.5 Differences between measuring mode and settings mode
The device is operated in two modes:
● Measuring mode (section 3.2 )
Measurements are taken in measuring mode. All functions
needed to take readings can be accessed from one menu.
● Settings (section 3.3 )
The device settings can be changed in settings mode. Infor-
mation about the device can also be retrieved. Measurements
cannot be taken in settings mode.
Settings are accessed via the menu in measuring mode. The
settings are access-protected by a PIN code.
3.2 Measuring mode
When switched on the device is in measuring mode (sec-
tion 3.1.3 ). In measuring mode, the current readings are always
displayed (Fig. 5).
3.2.1 Accessing the menu (measuring mode menu structure)
In measuring mode F1 can be used to access the Menu .
Zero point
Interspace
Gas measuring
Settings
Save measurement
Protocol
Device inspection
Device information
Exit
Fig. 6: Menu with submenus (menu items)
Protocols is only visible in the menu if at least one protocol is
saved.
Device inspection only appears in the menu when the integrat-
ed device inspection is switched on (section 5.1.1.4 ).