SEW MOVITRAC LTE-B series, Руководство по эксплуатации

Страница: 9 / 80

Operating Instructions – MOVITRAC® LTE-B
9
2
Installation and assembly
Safety Notes
2.6 Installation and assembly
Ensure that the unit is installed and cooled according to the regulations in the related
documentation.
Protect the unit from excessive strain. Especially during transportation and handling, do
not allow the components to be deformed or insulation spaces altered. Prevent mechan-
ical damage or destruction of electrical components.
Unless expressly intended for such use, the following applications are prohibited:
• Use in potentially explosive atmospheres,
• Use in areas exposed to harmful oils, acids, gases, vapors, dust, radiation, etc.,
• Use in stationary applications with mechanical vibration and impact loads exceeding
the values stipulated in EN 61800-5-1
Observe the notes in the "Mechanical Installation" section.
2.7 Electrical connection
Observe the applicable national accident prevention regulations when working on a live
drive controller.
Perform electrical installation according to the pertinent regulations (e.g. cable cross-
sections, fusing, protective conductor connection). The documentation contains addi-
tional notes.
Make sure that preventive measures and protection devices comply with the applicable
regulations (e.g. EN 60204-1 or EN 61800-5-1).
Required preventive measures:
2.8 Safe disconnection
The unit meets all requirements for reliable isolation of power and electronics
connections in accordance with EN 61800-5-1. All connected circuits must also
comply with the requirements for reliable isolation so as to guarantee reliable iso-
lation.
Type of power transmission Protective measure
Direct power supply • Protective grounding