SEW MOVITRAC LTE-B series, Руководство по эксплуатации

Страница: 7 / 80

Operating Instructions – MOVITRAC® LTE-B
7
2
Preliminary information
Safety Notes
2 Safety Notes
2.1 Preliminary information
The following basic safety notes must be read carefully to prevent injury to persons and
damage to property. The operator must ensure that the basic safety notes are read and
adhered to. Make sure that persons responsible for the system and its operation, as well
as persons who work independently on the unit, have read through the operating instruc-
tions carefully and understood them. If you are unclear about any of the information in
this documentation, or if you require further information, please contact SEW-
EURODRIVE.
The following safety notes are primarily concerned with the use of MOVIPRO
®
units. If
you use other SEW components, also refer to the safety notes for the respective com-
ponents in the corresponding documentation.
Please also observe the supplementary safety notes in the individual chapters of this
documentation.
2.2 General information
Removing covers without authorization, improper use or incorrect installation and
operation may result in severe injuries to persons or damage to machinery.
Refer to the following chapters for more information.
2.3 Target group
Any mechanical work may only be performed by adequately qualified personnel. Quali-
fied personnel in the context of this documentation are persons familiar with the design,
mechanical installation, troubleshooting and servicing of the product who possess the
following qualifications:
• Training in mechanical engineering, e.g. as a mechanic or mechatronics technician
(final examinations must have been passed).
• They are familiar with this documentation.
WARNING
Depending on its enclosure, the unit may have live, uninsulated as well as moving or
rotating parts and hot surfaces during operation.
Severe or fatal injuries.
• All work related to transport, putting into storage, setting up/mounting, connection,
startup, maintenance and repair may only be performed by trained personnel
observing
– The relevant detailed documentation
– The warning and safety signs on the unit
– All other relevant project planning documents, operating instructions and wiring
diagrams
– The specific regulations and requirements for the system, and
– The national/regional regulations governing safety and the prevention of acci-
dents
• Never install damaged products.
• Submit a complaint to the shipping company immediately in the event of damage.