2
Safety notes
Installation and startup
6
Operating Instructions Basic Unit – MOVITRAC
®
B
2
Safety notes
2.1
Installation and startup
• Never install damaged products or take them into operation. Submit a complaint to
the shipping company immediately in the event of damage.
• Installation, startup and service work on the unit to be performed by trained
personnel only. Such personnel must have undergone accident prevention training
and adhere to the applicable regulations (such as EN 60204, VBG 4, DIN-VDE 0100/
0113/0160).
• Follow the specific instructions during installation and startup of the motor and the
brake!
• The unit meets all requirements for reliable isolation of power and electronics
connections in accordance with EN 61800-5-1. All connected circuits must also
satisfy the requirements for reliable isolation so as to guarantee reliable isolation.
• Take suitable measures to ensure that the connected motor does not start up auto-
matically when the inverter is switched on (for example by disconnecting the elec-
tronics terminal block).
• Preventive measures and protection devices must correspond to the regulations in
force (e.g. EN 60204 or EN 61800-5-1).
The unit must be grounded as a protective measure.
Overcurrent protection devices are a necessary protection device.
