22
Operating Instructions – Safety-Related BST Brake Module
6
Mechanical Installation
Installation
Removal
1. Press onto the BST from the top. This causes the lower support rail edge [6] to come
off the notch [4]. At the same time, remove the BST from the lower holding fixture.
2. You can remove the BST from the support rail once the lower lock unfastens.
Minimum
clearance and
mounting position
• Leave 30 mm clearance at the top, 70 mm at the bottom and 15 mm at the sides for
optimum cooling. Make sure air circulation in the clearance is not impaired by cables
or other installation equipment.
• Ensure unobstructed cooling air supply and make sure that the units are not
subjected to heated air from nearby components.
• Install the units vertically only. Do not install the units horizontally, tilted or upside
down.
All dimensions in mm (in).
18014398646570507
15
15
70
30
(1.18)
(2.76)
(0.59)
(0.59)
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
