8
Operating Instructions – Safety-Related BST Brake Module
2
Target group
Safety Notes
2.3
Target group
Only qualified personnel is allowed to perform installation, startup, fault repair and
servicing (observe IEC 60364 or CENELEC HD 384 or DIN VDE 0100 and IEC 60664
or DIN VDE 0110 as well as national accident prevention guidelines).
Qualified electricians in the context of these basic safety notes are persons familiar with
installation, assembly, startup and operation of the product who possess the required
qualifications.
Any activities regarding transportation, storage, operation, and disposal must be carried
out by persons who have been instructed appropriately.
2.4
Designated use
The safety-relevant BST brake module is responsible for the power supply and control
of disk brakes from SEW-EURODRIVE. For the permitted combination of safety-related
BST brake module and SEW disk brake, refer to the section "Permitted unit combina-
tions" in the "Safety-Relevant Conditions" chapter. The safety-relevant BST brake
module is intended for industrial systems and may only be used in accordance with the
information provided in SEW-EURODRIVE's technical documentation and the informa-
tion given on the nameplate.
2.5
Transport
Inspect the shipment for any damage that may have occurred in transit as soon as you
receive the delivery. Inform the shipping company immediately. It may be necessary to
preclude startup.
2.6
Installation/assembly
Observe the notes in chapter "Mechanical Installation" (page 21).
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
