INFLATABLE BOA
TS
®
®
IMPORTANT! Inflate the product chambers in the following order:
1. Inflate the inside all-around safety chamber.
2. Inflate the floor chamber(s).
3. Inflate the outside main chamber.
The chambers on the product will be numbered to indicate order of
inflation also. This order of inflation will ensure the proper volume and
buoyancy of the safety chamber.
Note: To inflate the mini double lock
TM
valve, which is used on some
of the Sevylor boat floors and seat bottoms, follow the same infla-
tion instructions above, using the mini double lock
TM
valve adapter.
The mini Double Lock™ valve adapter is included with all Sevylor
®
pumps. The adapter can be purchased from Customer Service by
calling 1-800-835-3278 (Part Number 5010000707).
CAUTION!
Water temperature and weather do affect the pressure in inflatable
products. In cold weather your product will lose some pressure due
to the fact the air will contract. If this occurs, you may want to add
a little air to improve your product
’
s performance. However, in hot
weather, the air will expand. You must let some air out to prevent
your product from failing due to overpressure. You should avoid
exposing your product to extreme temperatures (hot or cold).
DEFLATION INSTRUCTIONS
Deflation instructions using any
Sevylor
®
Pump:
4
Remove nozzle of hose from inflation end and attach to
opposite deflation end of pump. Repeat same steps as
inflation. This will draw the air out quickly.
