- Place the capsule holder in its cradle, but leave the operating lever in its upper (i.e.
unlocked) position to avoid unnecessary strain on the unit.
Steam tube and frothing nozzle
For health reasons, all parts that have been in contact with milk must
be thoroughly cleaned after use.
- Pull the outer sleeve of the nozzle downwards and take it off.
- Loosen the ribbed ring on the inner sleeve, pull it downwards and
take it off also.
- Wipe the steam tube clean. On rare occasions, a blockage of the
steam tube may occur, which may be removed with a fine needle
or similar object.
- Clean both sleeves thoroughly with hot, soapy water. The sleeves
are
not
dishwasher-proof. Rinse both parts thoroughly in clean
water afterwards and wipe dry.
- Re-assemble the sleeves in reverse order on the steam tube.
Double-check that they are
securely fitted
.
Fold-down tray for small cups
The tray can be removed for easy cleaning.
- Fold down the tray.
- Pull one side out from the front.
- The tray may be washed by hand or in a dishwasher.
- Place the tray into the right side of its holding bracket and then push the left side gently
from above into its guide.
Descaling
Depending on the water quality (lime content) in your area as well as the frequency of use,
the appliance will need descaling (i.e. removal of lime deposits) to ensure proper
functioning. A lengthening of the brewing time and increased noise during brewing indicate
that descaling has become necessary.
For descaling, any commercially available, environmentally friendly liquid descaling agent
for coffee and espresso makers may be used. Observe the manufacturer’s instructions on the
packaging. For descaling, a vinegar/water or citric acid/water solution may also be used. Do
not use any formic acid-based descalers.
The descaling process:
- Dissolve the descaling agent in water in accordance with the manufacturer’s instructions,
then pour the solution into the tank. Do not use less than 0.75 litres or more than 1 litre.
When using citric acid or vinegar (no vinegar concentrate) and water, 1 part of the
descaling agent must be mixed with 4 parts of clean, cold water before the solution is
poured into the tank.
- Place the capsule-holder (without a capsule inserted) into its cradle and pull the
operating lever all the way down.
- Place a suitable container with a minimum capacity of 1 litre onto the drainer underneath
the outlet opening of the capsule-holder.
- The steam valve must be closed. Ensure that the rotary control is turned clockwise all
the way.
- Ensure that the unit is switched off. Press and hold both the steam button and the
32
