Setra Systems SRIMV, Руководство пользователя по установке и эксплуатации, Страница: 12 / 30

12
Fig. 3-9 Installed plugs on unused openings in the base.
Connect the pressure tubes to the high and low pressure ports. Wire to the electrical terminals on the back
of the housing. If desired, place electrical plugs on the unused holes in the base.
Complete the installation by installing the bezel onto the base by aligning the two and pushing the
bezel into the base until the bezel snaps to the base on the 2 sides. Be sure to carefully align the 2 parts
and push straight in. There are alignment features on the front bezel and rear housing.
4. 0 Menu Navigation and Configuration
The LCD display is standard on the SRIMV and the display provides valuable feedback during
configuration and for user feedback in the normal and alarm modes.
Apply 24 VDC or 24 VAC power.
Menu Flow Chart. The SRIMV flow chart is available on the setra.com web site to help with set up and
configuration. Use the QR code to get to setra.com.