Setra Systems SRIMV, Руководство пользователя по установке и эксплуатации

Страница: 17 / 30

17
Temperature Source
Choose between an analog sensor input (from
external sensor) or “set-up”. The sensor input
comes from the external sensor, whereas the
“set-up” option is added manually if there is no
temperature sensor used. Temp is used to
calculate air density; Default is 70 degrees
Fahrenheit or 21.1 degrees Celsius. Choose
“enter” to activate the Temp Source menu. The
menu will flash, then press the “down arrow” to
select desired temp source. Press “enter” to
select.
Enter Temperature
If Temp Source “set up” is chosen, manually
enter the temperature. Choose “enter” to activate
the Enter Temp menu. The menu will flash, then
press the “down arrow” to select desired digit.
Press “enter” to select and move to next digit.
Zero Calibration
“Tares” out any Zero pressure error. This must
be done with Zero pressure applied to the unit.
Velocity Alarm High Limit
Sets the alarm for the high side velocity limit.
Choose “enter” to activate the V Alarm H Limit
menu. The menu will flash, then press the “down
arrow” to select desired digit. Press “enter” to
select and move to next digit.