14
ENGLISH
INFORMATION!
Accessory
bolt receiver, item no. 1410960004
(optional accessory), is needed for operation in connection with
stand / mast system which need a DIN bolt for reception (only
ALDEBARAN® RAPTOR RP LED)
.
With the
ALDEBARAN® RAPTOR PRO RP LED
, the bolt reception (item no. 1410960012 [short]) is already integrated.
Electric connection
Connect the mains plug of the connecting cable to your mains connection socket.
The LED spotlight is ready for operation once it has been connected to the mains power supply.
WARNING!
• Lay the cables in such a way that there are no tripping hazards and they are protected from mechanical damage
such as tearing off or being run over.
• If necessary, secure the cables with tape or cable ties.
• Make sure the LED spotlight is securely set up and fastened before use.
• Also observe the applicable regulations on occupational safety!
Handling
1. Vertical adjustment
To adjust the inclination, hold the LED spotlight by the
carrying handle, pull the locking bolt and set the desired
angle. The inclination can be adjusted in several steps.
ATTENTION!
The locking bolt must engage in the desired position.
This prevents accidents and injuries.
Additional features of the ALDEBARAN®
RAPTOR PRO RP LED:
The
ALDEBARAN®
RAPTOR PRO RP LED
can also be used as
a mobile unit due to the integrated stand (G):
2. Setting up for operation on the ground
For use on the ground, fold the stand (G) back and place the
LED spotlight on the floor.
WARNING! Risk of injury!
When using the floor, make sure the surface is level and firm
to ensure a safe stand. Avoid places where moisture can
accumulate, e.g. in the rain. Do not place the LED spotlight
in water.
