42
SESAMO
DUALCORE
Maintenance: the maintenance interval on the DUALCORE SERIES automated system is
determined on the basis of the use intensity of the automation and the conditions of use.
In high-traffic systems
(entrances to airports, supermarkets, shopping centers, refreshment
rooms in motorway parking areas, etc.) or operating in particularly severe conditions
(exposure to corrosive agents, proximity to the sea, very windy areas, leaves subject to
frequent impacts with moving objects such as supermarket trolleys, etc.) it is recommended to
carry out
half-yearly
scheduled maintenance by a specialized technician.
In low traffic systems
(small businesses, private offices, homes, operating rooms, etc.),
scheduled maintenance should be carried out
yearly
by a specialized technician.
Maintenance manual
The following checks and procedures should be carefully performed during a scheduled
maintenance intervention carried out by an authorized technician:
❑
Disconnect the mains power supply using the bipolar switch upstream of the
automated system.
❑
Open the automated system by removing the cover.
❑
Disconnect the batteries
❑
Check the tightness of the screws of the carriages and of the components installed
inside the box.
❑
Check the wiring connections between the accessories, the sensors and the
electronic control unit.
❑
Clean the slide rail with a cloth (No detergent products) and check its integrity.
❑
Check the smoothness of the window, its general conditions (evaluate any out of
square caused by impacts) and above all that a minimum space of 5 mm remains
between the floor and the leaf in order to guarantee correct sliding even in case of
strong thermal expansion of the window.
❑
Clean the carriage wheels and check their wear; replace if necessary.
❑
If necessary, grease the slide rail with a thin layer of bearing grease.
❑
Check the wear state of the belt and grease if necessary.
❑
Reconnect the automated system to the mains power supply and to the batteries.
❑
Check the wear and proper functionality of the floor guide and if necessary grease
or replace.
Содержание DUALCORE LH100
