Servotronix CDHD2, Руководство пользователя

Страница: 30 / 44

CDHD2
30 Operator Panel (HMI)
Move Incremental - Distance
Code C 0 0 1 1
Command Move Incremental - distance
VarCom MOVEINC {distance} {velocity}
Sets the distance argument. Command uses velocity value set by JOGSPD1.
Sequence Select: C0011
Display:
i n c n n
Press:
Long Shift
Display: flashing 0
Press: (for example) Set a value of 2 (revolutions)
Press: Long Shift
Display: i n c n n (during movement)
Display: d o n e
(or an error code)
Note value of movement = revolution, counts, degrees
Sets distance for movement. Speed is set according JOGSPD1
Home
Code C 0 0 1 2
Command Home
VarCom HOMECMD
Sequence Select: C0012
Display:
h o n n e
Press: Shift
Display: Flashing 0 . in digit 1
Press: Set the value of a homing type
Press: Long Shift
Press: Long Shift
Display: (indicates homing progress in a % number)
Display:
d o n e
(or an error code)