52
1← Start the engine and allow it to fully warmed-up without load.
2←Close the accelerator. Rotate the idle adjusting screw to keep the engine running at 1400±100 rpm.
Precaution←
Idle speed adjustment shall be carried out while the engine is fully warmed up. Idle speed adjustment shall be carried out while the engine is
fully warmed up.
Adjustment of accelerator wire
Los componentes necesarios para ajustar la holgura del cable de arranque están debajo del puño acelerador; el método es el siguiente:
1← Loosen the locking nut.
2← Rotate the adjuster to make the wire clearance between 0.5 - 1.0 mm.
3← After clearance adjustment, tighten the locking nut once again.
Precaution:: After accelerator wire adjustment, check the operation of accelerator grip. Engine idle speed shall not increase due to the
adjustment, and the grip shall return to the closed position automatically.