Serioux SRX-WR150, Руководство пользователя

Страница: 20 / 58

Disable : When the Disable function (in the pull-down menu under the security mode) is selected,
the access strategy function is disabled. It stops access control of the wireless devices listed on the
MAC list. When the Disable function in the pull-down menu of Policy is selected, you can delete a
relevant MAC by clicking on the Del button in the MAC list and then by clicking on the Apply button
to submit the order and to restart the router.
Enable : When the Enable function is selected, the MAC address is added to the list to connect the
router to it.
WDS
Click on “Wireless Settings | WDS”, enter your wireless distribution system interface to enable the WDS,
or select the WDS (Wireless Distribution System) mode. WDS opens the W DS function on the radio
equipment, establishes WDS trust and communication, extends the expansion wireless signal, and
enables wide wireless network coverage.
Note : In order to use this function, the users must all be equipped with the WDS function and must all
be WDS members. Also, the channel of each transmission point must not set the automatic channel
choice. The same channel and same working mode are required to be set at each transmission point.
WDS member machines are located at different IP addresses of an identical network segment. If the
DHCP function is needed, enable just one of the machines and disable the other DHCPs. Use the
identical product brand (model and series) to obtain better compatibility and to enable the co nnection
for as long as possible. All SRX-WR products can support three modes: Lazy Mode, Bridge Mode,
and Repeater Mode:
1.Lazy Mode:
There is no need to fill in the BSSID of the opposite party in this mode. The W DS connection is now a
passive connection, so the other party should fill in the BSSID address of the router. This means that the
WDS mode of the other party’s machine can only be in a non-Lazy mode (Bridge or Repeater mode).
Also, the WDS connections of the machines must be in the same physical mode, they must be on the
same wireless channel (not on Auto), and they must have the same wireless encr yption type (not
supporting the Mix encryption type like WPAPSK/WPA2PSK). The machines must each have unique IP
addresses on the same network. Open only the DHCP function; close all other DHCP functions.