Serioux SRX-WR150, Руководство пользователя

Страница: 21 / 58

Phy Mode : Select the supporting Physical mode (CCK, OFDM, or HTMIX) . The same physical
mode must exist for all of the connecting equipment.
Encrypt Type : Select NONE (no encryption type). There are 3 types: WEP, TKIP (Temporal Key
Integrity Protocol) and AES (Advanced Encryption Standard) . You can set a maximum of four
different types and can use these types to connect to four different clients.
Note : The same encryption type must exist for all of the equipment to the connection to be
established.
Encrypt Key : Input a new key here after choosing the Encrypt Type.
2.Bridge Mode
The Bridge mode requires the BSS ID of the other client to be filled in. The A P SSID of this router
will be shielded so that the wireless client will not be able to determine this router. The wired client
can use a WAN port to access the Internet.
Phy Mode : Select the supporting physical mode (CCK, OFDM, or HTMIX) . The same physical
mode is required for all connecting equipment .
Encryp Type : Select NONE (no encryption type) . There are 3 types: WEP, TKIP (Temporal Key
Integrity Protocol ), and AES (Advanced Encryption Standard). You can set a maximum of four
different types and can use these types to connect to four different clients.
Note : The same Encrypt Type must exist for all connecting equipment in order to establish a
connection .
AP MAC address : Fill in the BSS ID of the WDS connecting equipment. You can fill in four different
BSS IDs in order to enable one-to-many connections.
3.Repeater Mode
You have to input the BSSID of the connected equipment. Either a wireless client or a wired client
(not a bridge ) can connect to the network in the WDS mode.