Serioux SRX-WR150, Руководство пользователя

Страница: 22 / 58

WPS (Wi-Fi Protected Setup)
WPS is a standard used to establish an easy and secure wireless client and router. It is created by
the Wi-
Fi Alliance, so you don’t need to choose the encryption type or to set the key. You can set
the WPS by inputting the right PIN code or by pressing the WPS/RESET button on the panel.
WPS Config : Select the Enable or Disable WPS function. You need to enable the WPS before you
can use the WPS button on the panel to set the PBC encr yption. (The default is Disabled)
WPS Summary : This displays the parameters of the current W PS settings,
including: WPS current status, SSID, authentication mode, encryption type, AP PIN, etc.
Reset OOB : Click this button to restore all WPS configurations to the defau lt value.
WPS Progress : It supports 2 ways to configure WPS settings: PBC (Push-Button Configuration)
and PIN (Personal Identification Number).
PBC : Select PBC or press the WPS button on the panel of the Router to 1 second. The WPS
indicator will blink, allowing you to enable the client to implement the WPS/PBC.
PIN : You have to know the PIN code of the client to use this option. Fill in the code and save it; then
use the same code for the client.
WPS Status : It displays the WPS current status. There are three states:
WSC Idle : It shows that the WPS current status is free.
WSC Start WSC Process : It shows that the WPS current status is sending a message.
WSC Success : It shows that access of the client to the AP is successful and that a WPS connection
has been established.
AP client
AP client settings option, only when the router works in "AP client" mode , the option can be set.
Including the wireless base station to be connected (wireless access point ) of the SSID, BSSID and
other parameters.