28
SERIAL CABLES PCI-SWGEN3-81U PCI Switch Board User’s Manual
• setmaxspd Command
This command is for set link speed of NVMe drive slot.
Syntax
Usage: setmaxspd slot(D) Gen(D)
Example: Set slot 2 max link speed to Gen2
JBOF>setmaxspd 2 2
Note: this setting did not store in configuration, after system reset, max link speed will return to
default setting (PCIe Gen3)
• ver Command
This command is for show microcontroller firmware version of
PCIe switch board
.
Syntax
Usage: ver
Example: Check microcontroller firmware version
JBOF>ver
