12
SERIAL CABLES PCI-SWGEN3-81U PCI Switch Board User’s Manual
Step 1.
Install and launch Tera Term application (or Hyper Terminal requires version 3.0 or
higher).
Step 2:
To ensure proper communications between PCIe switch board and the VT100 Terminal
emulation, please configure the VT100 Terminal emulation settings to the values shown below:
For “Port”, select COM3 in this example. (Depend on which COM port used on Host)
For “Baud rate”, select 115200.
For “Data”, select 8 bit. For “Parity”, select none.
For “Stop”, select 1 bit. For “Flow control”, select: none.
Click OK when you have finished your selections.
