SereneLife SLRD36WIFI, Руководство пользователя

Страница: 8 / 24

8
3. Insert the lens hood to the slot and make
sure the lowe edge of the lens hood next
to the mobile phone closely as Picture 9.
Picture 9
Charging Instruction
Drone Battery
Picture 7 Picture 8
Li-Po Battery Disposal & Recycling
Wasted Lithium-Polymer batteries must not be placed with household trash.
Please contact local environmental or waste agency or the supplier of your
model or your nearest Li-Po battery recycling center.
1. Connect the USB wire with one of the USB port listed in the below picture first, and
then connect the drone battery with the USB wire. (prior to choose 2A, 5V charger)
2. After connecting the USB wire with the USB port, the green USB indicator light
keeps bright. After connecting the USB wire with the drone battery, the red USB
indicator light keeps bright. About 140~160 minutes later, the light turns to green
and keeps bright when fully charged.
3. Li-Po battery is included in spare parts and please pay attention on the safe notice.
* Do not put the battery on high temperature place, such as fire or heating device
to avoid damage or explode.
* Do not use the battery to crash or hit hard surface.
* Do not put the battery in water and keep it in dry place.
* Do not open the battery.
* Do not leave the battery without supervision when charging.
* Make sure that there is no short circuit of the power wire.
* Please use the recommended charger only.
* Check the charger’s wire, plug, surface regularly. Do not use broken charger.