SereneLife SLRD36WIFI, Руководство пользователя

Страница: 7 / 24

7
Landing Gear Installation Diagram
To install the Landing Gear, insert the Landing
Gear’s pillars into the drone body holes with
moderate force as the diagram shown.
Note: Please ensure the Landing Gear can
stand firm on the ground. Or the flight
stability would be effected.
Picture 5
Transmitter Installation:
Battery installation: open the battery cover on the back side of the transmitter and
put 4 alkaline batteries (not included) into the box in
accordance with electrode instructions.
Picture 6
Battery Cover
4X1.5V
Alkaline Batteries
Drive the screw according to
the arrow direction to loosen
the screw to open the battery
cover. Tighten the screw by
driving it in opposite direction.
1. Make sure the electrodes are correct.
2. Do not mixed use new and old batteries.
3. Do not mixed use different kinds of batteries.
4. Do not charge the non rechargeable battery.
Notice
：
Attaching your Mobile Phone to Transmitter
1. Press the self-locking switch on the top right side of the mobile holder and
push the holder to a fully open position as Picture 7 shown.
2. Place the mobile phone facing frontward position, pull the mobile phone holder
down and press tightly as possible to secure the mobile phone and transmitter
(please note that do not touch the mobile phone button) as Picture 8.